FREE SHIPPING ON ALL TIMERS - PRICES IN USD
Cart 0

Product Instructions

Getting Started Guide

Download the getting started guide here.

App Instructions

Connecting/Reconnecting

After the first time you launch the app, connecting to the timer is done from the side panel menu. Press the side panel icon in the top left of the app and choose ‘Manage Displays’. The timer will appear in the list of devices and you can tap it and press ‘Connect’.

Disconnecting

When you are done using the Flex Timer, use the power off button in the top right of the app to disconnect. Disconnecting allows other users to connect to the timer.

If you leave range of the Timer, you will also be disconnected. If the timer is running, it will continue to run until the sequence you programmed is complete.

Renaming Timer

If you wish to rename your timer from the default ‘GymNext’ name, connect to your timer and then choose ‘Settings’. Tap on the device name cell, enter in a new name and press ‘OK’. The timer will restart under a new name.

Setting Time Zone

By default, the timer will take on the time zone of the first device that connects. If you wish to change the time zone, connect to your timer and then choose ‘Settings’. Tap on the time zone, enter the offset and press ‘OK’.

Enabling Security

If you wish to prevent users from changing administrative settings (time zone, device name, etc…), then you can enable a security code that will be required before these settings can be changed. To enable this level of security, connect to your timer and then choose ‘Settings’. Tap on the ‘Security’ toggle and provide a four digit security code. Ensure the ‘Secured Operations’ is set to ‘Admin’.

If you wish to prevent users from connecting to the device and doing any operations at all including programming a time sequence, then you can enable a security code that will be required of all users upon connecting to the device. To enable this level of security, connect to your timer and then choose ‘Settings’. Tap on the ‘Security’ toggle and provide a four digit security code. Ensure the ‘Secured Operations’ is set to ‘All’.

Connecting a Heart Rate Monitor

Press the side panel icon in the top left of the main app screen and choose ‘Manage Sensors’. Any heart rate monitor that supports the standard bluetooth Heart Rate protocol will be displayed. Select your heart rate monitor and press ‘Connect’

You can configure to have your heart rate displayed periodically throughout your workout or you can define customizable heart rate zones and be notified when you enter or exit these zones.

Connecting to Multiple Devices

To connect to and control multiple timers simultaneously, press the side panel icon in the top left of the main app screen and choose ‘Manage Displays’. Enable the ‘Control multiple displays’ toggle. Any timers within range will display in the list. Simply tap on the timers you wish to control and press ‘Connect’. From that point on all actions that you take will be reflected in all of the timers you are connected to.

Understanding the Different Timer Modes

Standard

Standard

Round

Round

Interval

Interval

Tabata

Tabata

Every Minute on the Minute

EMOM